Just 60 Seconds for You Is A Revolution for the Visually Impaired.
The easiest way to embrace the technological revolution on your existing signs:
Recommendations for Implementation in a building complex which is already equipped with Signs
We at MIRTEC took upon ourselves to globally lead the design and production of indoor signage and WAYFINDING industry and have recently decided to provide better WAYFINDING solutions for the visually impaired. It is a simple applicable and easy to implement solution. Our solution represents a real revolution and a fundamental change in the visually impaired quest, to achieve a greater degree of independence. Let us join hands together and support millions by providing an easily implementable accessibility system for them.
We present you with workable solutions that can be installed on existing WAYFINDING signs and new signage for an entire segment of the visually impaired. We have developed for them a simple and an easy applicable solution to implement. For the visually impaired, it is a revolution and a fundamental change in their ability to attain a greater degree of independence. For us and for you, it is a small additional contribution for the achievement of such a mission.
We recommend:
In order to maximize the benefits of our novel accessibility feature, we recommend placing the accessibility tag at the users’ optimal location, without changing the existing sign. The extensive tests that we have conducted show that the accessibility tag should be optimally placed on the sign’s lower left portion, near its bottom. Users tend to search the lower left part of the sign seeking for orientation and there they should comfortably find the new accessibility tag.
For the easy scanning of the NEW ACCESSIBILITY TAG, it is recommended to level the heights of the sign’s facings with the height of the accessibility tag by elevating the tag.
- Clean the surface around the area of the accessibility tag from dust, grease and grime.
- The gluing surface must be smooth.
- Scan the tag prior to attaching, in order to check the tag’s matching to the room.
- The accessibility tag should be posted outside of the sign, on the wall next to it, on its left side near the bottom.
- For the exact location you should be using the “MIRTEC‘s assembly stencil” shown below, that will be provided for you as a service.
HOW TO SPECIFY?
Dear Architect, Planner,
We are pleased that you have found interest in our new smart phone accessibility system for thousands of people – your visitors and customers, who will happily adopt with great pleasure this innovation. For them it is a revolution and for you it is just a 60 seconds additional attention.
The add-on that you are about to incorporate in your existing sign is very significant. All visually impaired are using today smart phones. MIRTEC expands its use to attain a personal experience of accessibility combined with the convenience of using a familiar device.
We took the issues for which we provide our solutions based on the laws of accessibility and put them on a specifications leaflet as your guiding tool.
NFC tag type NTAG213
- To be stuck-on on metal with a polyester coating for moisture protection. A 30 mm diameter circle with double sided qualitative adhesive tape.
- An accessibility logo is printed on the tag’s front
- Positioning of the accessibility tag on a new sign, according to the instructions shown in the drawings
- Positioning of the accessibility tag on an existing sign, according to the instructions shown in the drawings
- Contrasting colors are according to the standardization ratio of 70/30
- The text is according to the standardization size of 15-50 mm
- The tag will be blocked for burnt-in code changings
Moreover, we are issuing for you a number of technical recommendations to achieve effortless upgrading.
Recommendations for implementing the NEW ACCESSIBILITY TAG in a new project
A new sign – it is recommended to place it on the sign’s facings
In order to maximize the considerable benefits of the novel accessibility system, it is recommended to incorporate in the planning process the optimal position of the user. The extensive tests that we have conducted, show that the accessibility tag should be optimally placed on the lower left portion of the sign, near the bottom, similar to the existing instructions of ADA in this field.
- As a first phase, in order to avoid mistakes, scan the tag before adhering it to the sign to ensure compliance between the tag and the selected sign.
- After reaffirming that the tag and the sign are compatible, clean the surface designated for gluing from dust, grime and grease. The surface must be smooth and flat.
- If you want to attach the tag to a new sign, the tag should be placed on the sign’s facings at the bottom left part of it (see Figure A at the bottom of the page).
- If you want to attach the tag to an existing sign, the tag should be placed on the wall next to the sign, at its lower left corner (see Figure A at the bottom of the page). In this case it is recommended to level the heights between the left face of the sign the tag itself by raising the tag higher, so to enable easy scanning.
- A new sign – the accessibility tag should be posted up on the sign’s facings.
- An existing sign the accessibility tag should be posted up outside of the sign, next to it, and by leveling the sign’s and the tag’s heights